Home Page Welder Hire Welding Gas Contact Us Welder Repairs AUTOMATIC WELDING HELMETS UK's largest Independent Supplier of New Used & Hired Welding Equipment and Products We Ship Worldwide Contact us today for a quote on any of the products on this website Tel: +44  0117 9352540 -  Fax: +44  0117 9352627 MUREX ACCESSORIES : AUTOMATIC HELMETS   PERSONAL PROTECTION WELDING HELMETS AND HANDSCREENS For arc welding, safety is of paramount importance. Arc welding generates visible light as well as harmful radiation in the infra red and ultra violet, which can damage eyes and skin. To be protected from harmful radiation, the welder will need full protection in the form of a helmet or hand screen, with eye protection provided by shaded filter lenses. NB: MUREX WELDING HELMETS COME WITHOUT FITTED LENSES - EXCEPT THE EYE-TECH RANGE, ALBATROSS, MULTIVIEW AND COMBINATIONS.   AUTOMATIC HELMETS EYE-TECH 5-13 IMPROVEMENTS The Eye-Tech 5-13 has all the advanatages and reliability of the traditional Eye-Tech with the following improvements. MOST WELDING APPLICATIONS The new Eye-Tech 5-13 helmet can be used for MIG, TIG and Gas welding applications. STYLISH The traditional Eye-Tech design in a heat reflective metallic silver finish. MULTISHADE From shade 5 to 9 and 9 to 13 GRINDING FACILITY By the press of the main button the lens will remain clear for 10 minutes to allow the wearer to cut or grind. A red warning light will flash inside the helmet to warn the wearer that they are in grinding mode. SENSOR The lens has a sliding sensor bar instead of a removable one. Not suitable for laser welding Part No. Description 700000890 EYE-TECH 5/13 AUTOMATIC HELMETS EYETECH HELMETS CE APPROVED TO EN166/379 The Eye-Tech helmets are based on an accomplished ergonomic design and using the skills of modern, advanced electronics. It is comfortable and safe, which increases the possibilities of achieving higher productivity and quality. On the Eye-Tech, the darkness of the eyeshade is continuously adjustable between shades 9 and 13. The Eye-Tech 1012 offers a choice of two darkness values, as does the Eye-Tech 10/11. NO ON OR OFF SWITCHES POWERED BY SOLAR CELLS ADJUSTABLE OR FIXED EYESHADE DARKNESS ADJUSTABLE FOR HEAD SIZE, FIVE SETTINGS Part No. Description 700000890 EYE-TECH 5/13 700000880 EYE-TECH 9/13 700000884 EYE-TECH 1012 700000888 EYE-TECH 10/11 ALSO AVAILABLE EYE-TECH HELMETS ALREADY ASSEMBLED TO TAKE AIR 140/175 Part No. Description 1416229 EYE-TECH 5/13 for Air 140/175 1416226 EYE-TECH 9/13 for Air 140/175 1416227 EYE-TECH 1012 for Air 140/175 1416228 EYE-TECH 10/11 for Air 140/175 Viewing area 98mm x 40mm Light transmittance ultraviolet min: shade no. DIN 15:<0.000027% Light transmittance infrared min: shade no. DIN 14:<0.011% Visible range activated shade levels: DIN 9-13 continuously adjustable manually Visible range not activated shade: DIN 4: 5.2% Switching time from light to dark: <0.0005 sec. (0.5ms) Switching time from dark to light: approx. 0.4 sec Operating temperature: -5 deg C to +55 deg C Power supply: solar cells Scattered light corresponds to: DIN 4647 part 7/CE EN379 Homogenity corresponds to: DIN 4647 part 7/CE EN379 Optical class corresponds to: DIN 4647 part 7/CE EN379 Weight of cassette: approx. 125g Total weight: approx. 500g Dimensions front cover lens: 114.8mm x 93.9mm Dimensions inside cover lens: 98mm x 45.3mm Standards DIN/CE/ANSI/CSA   EYE-TECH SPARE PARTS Eye-tech spare lenses Part No. Description 700000010 Front Cover Lens 700000011 Rear Cover Lens 700000001 Shade Cartridge 700000022 Shade Cartridge 1012 700000028 Shade Cartridge 10/11 700000024 Coloured Lens din 2.0 700000025 Coloured Lens din 1.2 700000026 Coloured Lens din 0.8             Inner Magnifying Lenses Part No. Description 700000030 + 367951001 D1 700000030 + 367951002 D1.5 700000030 + 367951003 D2 700000030 + 367951004 D2.5         Fresh air unit Part No. Description 700002883 ESAB Air 175       Misc Part No. Description 700000002 Helmet without cartridge 700000003 Head band kit 700000005 Sweat band pk1 700000006 Front lens frame 700000007 Potentiometer Switch 700000008 Sensor Bar 700000009 Helmet knob 700000017 Leather Hood 700001880 Ear defender set 700000034 5-13 Helmet without Cartridge 700000035 5-13 Cartridge inc Satelite 700000037 Pot Knob 5-13 700000038 Sensitivity knob 5-13 700000039 Satelite Cover Plate               ALBATROSS 3000 HELMET CE APPROVED TO EN166/175 349502200 - 60x110 Weight 360g. The Albatross 3000, with its large panoramic window behind the visor, provides an excellent overview of the workpiece when you are not welding. Shade 10 lens fitted is standard. The Albatross 3000 is very adaptable with the following optional extras. Part No. Description 700000029 Automatic Filter Lens shade 10/11 1415618 Albatross with Fresh Air Unit 349501886 Albatross with Compressed Air Unit 468051881 Hard Hat 367420003 Hearing Protection 349502202 Helmet for Air 140 Pack               ALBATROSS 90 x 110 FOR AIR UNIT Part No. Description 349502206 Albatross 90 x 110 349501084 Flip up Cover 90 x 110 SHADE CARTRIDGE 10/11 PART NO 700000029 electronic welding glasses Auto-shade with a fixed darkness value of 10, and in bright surroundings a darkness value of 3. Size 60 x 110mm. Supplied with an extra glass with darkness value 2 that can be put inside the welding glass so that the darkness value increases from 10 to 11. Albatross spare lenses 60 x 110mm Part No. Description 349501082 Safety Glass Plastic (for visor) Magnifying Lens Part No. Description 367951001 Diopter + 1.0 367951002 Diopter + 1.5 367951003 Diopter + 2.0 367951004 Diopter + 2.5 Misc Part No. Description 000595193 Chin Cover 000595178 Face seal with Chin cover 000595216 Upper seal 000500519 Head fastener 000500520 Screws for head fastener 000595239 Branched air hose 349501081 Visor 000595153 Spring 349502202 Helmet for Air 140 ALBATROSS 3000 HELMETS Part No. Description 349502200 Standard Albatross 3000 Helmet 349501907 Albatross with hard hat complete 349501906 Albatross with hard hat and hearing protection complete ALBATROSS WITH ESAB AIR 140 Part No. Description 1415618 Albatross with ESAB Air 140 complete 349601911 Albatross with ESAB Air 140 and hard hat complete 349501910 Albatross with ESAB Air 140, hard hat and hearing protection complete ALBATROSS WITH COMPRESSED AIR Part No. Description 349501886 Albatross with compressed air complete 349501909 Albatross with compressed air and hard hat complete 349501908 Albatross with compressed air, hard hat and hearing protection complete SPARE UNITS Part No. Description 349502202 Albatross helmet for ESAB Air 140 349502201 Albatross helmet for hard hat 349502203 Albatross helmet for Air 140 and hard hat 349501072 Compressed air unit for Albatross MUREX MULTIVIEW HELMET The Murex Multiview helmet offers a revolutionary design with exceptional coverage and protection and versatility of use with the interchangeable cartridge system. It has an aerodynamic form which optimises deflection of welding fumes and is very comfortable to wear. The Multiview helmet comes complete with cartridge 110 x 90 electronic 9-13 filter with cover and backing lenses. The electronic filter has a full 2 year warranty. Part Number 1415777 PARTS FOR MULTIVIEW Part No. Description Pack Size 1415778 Cartridge Golden 1 1415958 9-13 Auto Lens 1 1415863 Backing Lens 120x137 10 1415865 Filter 133 x 114 Shade 9 5 1415866 Filter 133 x 114 Shade 10 5 1415867 Filter 133 x 114 Shade 11 5 1415868 Filter 133 x 114 Shade 12 5 1415869 Filter 133 x 114 Shade 13 5 1415870 Cover Lens 120x137 10 1415967 Sweat Ban Multiview 1 1415968 Headgear for Multiview 1 1415995 Multiview without cartridge 1 1415996 Flip Front Cartridge Multiview 1 1415997 Backing Lens 9-13 Multiview 10 MUREX 9-13 MULTIWELD HELMET - 1416393 CE APPROVED TO EN379 The latest generation auto darkening welding helmet with a fast reaction time of 1/20,000 seconds and offers full UV and IR protection. The twin sensor, solar powered lens unit offers a variable shade adjustment from 9-13, sensitivity adjustment and a variable delay from dark to light state. Shade adjustment is controlled by a rotary switch conveniently located on the left of the helmet. Lens viewing area 98mm x 47mm. Super lightweight and a fully adjustable harness and anti-bacteria/anti-odour sweatband. Part No. Description 1416393 Multiweld 9-13 SPARES FOR MULTIWELD Part No. Description Pack Size 1416262 Cover Lens 10 1416263 Backing Lens 10 1416264 9-13 Cartridge 1 1416265 Headgear for Multiweld 1 1416266 Sweat Band 1 WE ALSO STOCK THE SIP RANGE OF PLASMA CUTTERS WE ALSO STOCK THE CEBORA RANGE OF PLASMA CUTTERS Contact Information If you would like more information on any of the machines featured on this Website, or if a particular machine is available for hire, then please contact us by phone, fax or email. Independent Welding Services Ltd Unit 2 15 Douglas Road Kingswood Bristol. BS15 8NH United Kingdom   Tel: +44 0117 9352540 Fax: +44 0117 9352627 e-mail: info@indeweld.com  subject to stock availability  You should receive a timely  response with 24 hours. Home Page Welder Hire Welding Gas Contact Us Welder Repairs