|
|
Hypertherm Plasma Cutters |
UK's largest Independent Supplier of New Used & Hired Welding Equipment and Products
We Ship Worldwide Contact us today for a quote on any of the products on this website
Tel: +44 0117 9352540 - Fax: +44 0117 9352627
Hypertherm the world leader in plasma cutting technology
When you only do one thing, you'd better do it better than anyone else. As the only major manufacturer to focus exclusively on plasma cutting technology, Hypertherm is committed to providing the highest quality systems in the world: improving the performance, reliability and value of our systems, and serving and supporting Hypertherm users. This commitment to technology leadership,quality and support makes Hypertherm the first choice of the true cutting professional. |
|
Portable air plasma cutting system with built-in compressor
1/8" (3 mm) Recommended Capacity
3/16" (4.5 mm) Maximum Capacity
1/4" (6 mm) Severance Capacity
Superior performance and versatility
The Powermax 190c plasma cutting system takes professional metal-cutting power where it has never been before. Just plug it into most household power± and you're in business. And don't worry about providing separate air, because a built-in compressor gives you all you'll need. You'll be able to cut most sheet metals almost anywhere. |
|
High-performance portable plasma cutting system
1/4" (6 mm) Recommended Capacity
3/8" (10 mm) Maximum Capacity
1/2" (12 mm) Severance Capacity
The leader in 115/230-volt air plasma cutting performance
The Powermax 380 delivers outstanding plasma cutting performance and value to the sheetmetal contractor, fabricator and service professional. This portable system applies
leading Hypertherm technology for the optimal use of the compressed air and 115/230-volt
power most commonly available on the job siteor in the shop. Superior portability and flexibility maximize on-demand productivity. |
|
High-performance portable plasma cutting system
1/2" (12 mm) Recommended Capacity
5/8" (16 mm) Maximum Capacity
7/8" (22 mm) Severance Capacity
Superior performance by hand or machine
The Powermax 600 raises performance and reliability standards for air plasma cutting systems. All you need is input power and low-cost compressed air to cut through mild steel, stainless steel, aluminum and most other metals with new power and productivity. |
|
The performance standard for air plasma cutting
3/4" (19 mm) Recommended capacity
1" (25 mm) Maximum capacity
1 1/4" (32 mm) Severance capacity
Superior performance by hand or machine
The Powermax 1000 is the latest addition to the Powermax G3 Series. With advanced technologies in both power supply and torch, Hypertherm G3 products cut faster and more economically than any system available today. The Powermax 1000's Auto-voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 1- or 3-phase (CE 230 to 400 V 3-phase only). A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology and easy-to-read controls, and you have the most advanced plasma cutter money can buy. |
|
The performance standard for air plasma cutting
7/8" (22 mm) Recommended capacity
1 1/8" (29 mm) Maximum capacity
1 1/2" (38 mm) Severance capacity
Superior performance by hand or machine
The Powermax 1250 is the first of thePowermax G3 Series. With new technologies in both power supply and torch, it cuts faster and more economically than any system available today. In fact, it cuts 80% faster on 1-inch (25 mm) mild steel than any competitor tested. Its Auto-voltage™ circuit provides automatic adjustment to any input voltagefrom 200 to 600 volts, 1- or 3-phase. A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology and easy-to-read controls,and you have the most advanced plasma cutter money can buy in the world. |
|
The performance standard for air plasma cutting and gouging
1-1/4" (32 mm) Recommended capacity
1-1/2" (38 mm) Maximum capacity
1-3/4" (44 mm) Severance capacity
Setting a new performance standard for air plasma cutting
The Powermax 1650 is the latest addition to the Powermax G3 series of systems. With
advanced technologies in both power supply and torch, Hypertherm G3 products cut faster,
and more economically, than any system available anywhere today. Its Auto-voltage®
circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 3-phase
(CE 230 to 400 V 3-phase only). A state-of-the-art, microprocessor-driven architecture
assures optimum system reliability. Add to this Hypertherm's advanced torch technology,
and easy-to-read controls and features, and you have the most powerful, advanced, and
reliable plasma cutter money can buy. |
|
High Capacity, Dual-Gas Plasma Cutting System
For Cutting Gauge To 2 Inch (50 mm) Metals
1" (25 mm) Recommended Maximum Mechanized Production Capacity
2" (50 mm) Maximum Cutting Capacity
The MAX 200 Advantage
200 amp, 30 kw power output delivers heavyduty cutting capacity up to 2 inches (50 mm) thick on most metals; typical cutting speeds greatly exceed oxyfuel or other methods. 100% duty cycle at full power keeps you cutting - all day long. Adjustable power output from 40 to
200 amps lets the operator precisely match power to cutting requirements. A state-of-the-art transistorized power supply maintains constant output current regardless of variations in input voltages or torch-to-work distances, ensuring clean, square cuts throughout the cutting range. MAX200's dual gas system - plasma and shield - allows you to run on Air/Air, O2/Air, N2/Air, N2/CO2, Ar-H2-N2 or other combinations for optimal results on all metals and in all conditions. |
WE ALSO STOCK THE SIP RANGE OF PLASMA CUTTERS
WE ALSO STOCK THE CEBORA RANGE OF PLASMA CUTTERS
|
Contact Information
If you would like more information on any of the machines featured on this Website, or if a particular machine is available for hire, then please contact us by phone, fax or email.
Independent Welding Services Ltd
Unit 2
15 Douglas Road
Kingswood
Bristol. BS15 8NH
United Kingdom
Tel: +44 0117 9352540
Fax: +44 0117 9352627
e-mail: info@indeweld.com
subject to stock availability
You should receive a timely
response with 24 hours. |
|