| |
PLASMA CUTTERS
|
Plasma 25 Plasma Cutter X6910
These Plasma Cutting machines are easy to use, give a very fast, clean and precise cut and are ideal for cutting mild and stainless steel, aluminium,brass and copper.25 amps of cutting power. Capable of cutting up to 4mm mild steel.
Portable - Integrated handle.
230v, 20 amp supply enables job portability..
Price: £399.99 (Excluding: VAT at 17.5%) |
|
Plasma 30 Plasma Cutter X6940
Plasma 30 features:30 amps of cutting power
Cutting up to 6mm mild steelWheel mounted - Large sturdy rubber wheels.
230v, 30amp supply requirements enable mobility.
Pressure gauge-to ensure correct operating air pressure.
Price: £579.99 (Excluding: VAT at 17.5%) |
|
Plasma 50 Plasma Cutter X6970
Plasma 50 features:50 amps of cutting power
Cutting up to 10 mm mild steel.Wheel mounted - Large sturdy rubber wheels enable tremendous mobility where 3ph electrics are available.Pressure gauge -to ensure correct operating air pressure.
Price: £799.99 (Excluding: VAT at 17.5%) |
|
Plasma 120 Plasma Cutter X6987
Fast, clean and precise cuts reliably on mild and stainless steels, aluminium, brass and copper.
120 amps of cutting power - Capable of cutting up to 30mm mild steel.3 power settings - Provides optimal cutting power from 50 amps preventing distortion on extremely thin materials.
Price: £1,499.99 (Excluding: VAT at 17.5%) |
WE ALSO STOCK THE CEBORA RANGE OF PLASMA CUTTERS
WE ALSO STOCK THE HYPERTHERM RANGE OF PLASMA CUTTERS
|
|
SIP has been manufacturing a complete Plasma cutting range for many years.
Each unit producing fast, clean and precise Cuts reliably on mild and stainless steels, aluminium, brass and copper.
A host of features through out the range provide tremendous flexibility in a multitude of different environments, with the range spanning from
The workshop through to heavy industrial use.
DID YOU KNOW?
Our superb range of Plasma Cutters can cut from 1mm to 30mm of sheet mild steel!
Air cooled torch - both cooling gas and plasma for convenience and economy, simply connect to a suitable air supply.
Copper wound transformer - Smooth and powerful.
Pilot arc - Facilitates starting especially on painted & coated surfaces.
built in logic circuits - Prevents unit damage by ensuring the correct operation sequence and air supply.
2 power settings - Provides optimal cutting power preventing distortion on extremely thin materials.
Contact action ignition - Reliable, effective & simple arcing procedure.
Self resetting thermal cut-out Optimum unit protection.
Fan cooled - For elevated and extended cutting power output.
Diagnostic warning lights - Alert to unfulfilled operational requirements.
Heavy duty case and chassis
For excellant durability and damage prevention.
6 months warranty
For peace of mind.
Please contact us to confirm
stock availability
& carriage charge.
please contact use Email:
info@indeweld.com
You should receive a timely
response with 24 h |
