|
UK's largest Independent Supplier of New Used & Hired Welding Equipment and Products
We Ship Worldwide Contact us today for a quote on any of the products on this website
Tel: +44 0117 9352540 - Fax: +44 0117 9352627
  
WE ALSO STOCK CEBORA MIGS
|
Why MIG/Flux cored?
MIG and flux cored welding offer advantages over other welding processes, especially for the novice. With these two processes, the welding machine creates an arc between the work piece (what you want to weld) and a continuously consumable electrode (the "wire" in these wire welding processes).
The operator need only focus on directing the MIG gun at the joint and proper motion. Most welding machines that can MIG weld can also flux cored weld. |
|
Miller - XMT 304 CC/CV
The multiprocess XMT 304 CC/CV combines the advantages of inverter-based power
with the built-in features and productivity of high-end MIG machines.
Features
Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
Process selector switch reduces the number of control setup combinations without reducing any features.
Large, dual digital meters are easy to view and presettable to ease weld output.
Pulsed MIG capabilities with optional Optima™ control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emmision.
Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
Optional - 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, ect. |
|
Miller - SUITCASE 8RC &12RC
The SuitCase 8RC and 12RC offer a modular design, lightweight, and small size, with superior durability needed to stay in service, and keep up with production schedules.
Features
Totally enclosed, impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants.
Ergonomically sound, lightweight, modular design is well balanced, and allows improved mobility and ease of carrying to remote welding sites and for serviceability.
Flexibility to run a variety of wires up to 5/64 in diameter.
Quick-change drive rolls are easy to change - no tools required.
Drive roll accessibility makes it easy to install wire, adjust tension and change drive rolls.
Carry handle folds up out of operators way, yet large enough for a gloved hand to carry.
Remote voltage control - standard. Gas solenoid control - standard. |
|
|
Handymate Gasless Mig Welder 6501
Gassless operation - Utilises flux cored wire making this unit incredibly
easy to use and portable. Excellent for welding out of doors even in
windy conditions as there is no gas that can be blown away preventing weld oxidation.
Price: £99.99 (Excluding: VAT at 17.5%) |
|
MIGMATE 105 Turbo Welder X6504
105 amp power - Will weld up to 4.5mm mild steel
Versatile - Welds from 0.7 to 4.5mm mild steel, aluminium and
stainless steel with the apropriate gas and wire.
Everything included - Welding mask, wire, disposable gas cylinder,
regulator, chipping hammer/wire brush and earth cable with clamp.
Price: £149.99 (Excluding: VAT at 17.5%) |
|
MIGMATE 130 Turbo Welder X6508
Voted Five Stars In Practical Classics 2004
130 amp power - Will weld up to 5 mm mild steel
Versatile - Welds from 0.7 to 5 mm mild steel, aluminium
and stainless steel with the apropriate gas and wire.
Everything included - Welding mask, wire, disposable gas cylinder,
regulator, chipping hammer/wire brush and earth cable with clamp.
Price: £159.99 (Excluding: VAT at 17.5%) |
|
MIGMATE 130 Turbo DP 110V Mig Welder X6507
MIGMATE 130 Turbo DP 110V Mig Welder 6507
130 amp power - Will weld up to 5 mm mild steel
Versatile - Welds from 0.7 to 5 mm mild steel, aluminium and stainless steel
with the apropriate gas and wire.
Price: £174.99 (Excluding: VAT at 17.5%) |
|
MIGMATE 150 Turbo Mig Welder X6510
150 amp power - Will weld up to 6 mm mild steel
Versatile - Welds from 0.7 to 6 mm mild steel,
aluminium and stainless steel with the apropriate gas and wire.
Price: £174.99 (Excluding: VAT at 17.5%) |
|
MIGMATE Pro 170 Turbo DP Mig Welder X6515
170 amp power - Will weld up to 7 mm mild steel -
Versatile - Welds from 0.7 to 7 mm mild steel,
aluminium and stainless steel with the apropriate gas and wire.
Price: £269.99 (Excluding: VAT at 17.5%) |
|
Contact Information
If you would like more information on any of the machines featured on this Website, or if a particular machine is available for hire, then please contact us by phone, fax or email.
Independent Welding Services Ltd
Unit 2
15 Douglas Road
Kingswood
Bristol. BS15 8NH
United Kingdom
Tel: +44 0117 9352540
Fax: +44 0117 9352627
e-mail: info@indeweld.com
subject to stock availability
You should receive a timely
response with 24 hours. | |
click on this link for CEBORA MIGS
|